dmesg - GTX 1070 Ti
Linux version 5.4.0-47-generic (buildd@lcy01-amd64-014) (gcc version 9.3.0 (Ubuntu 9.3.0-10ubuntu2)) #51-Ubuntu SMP Fri Sep 4 19:50:52 UTC 2020 (Ubuntu 5.4.0-47.51-generic 5.4.55)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Hygon HygonGenuine
Centaur CentaurHauls
zhaoxin Shanghai
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] reserved
BIOS-e820: [mem 0x0000000000001000-0x000000000008ffff] usable
BIOS-e820: [mem 0x0000000000090000-0x0000000000090fff] reserved
BIOS-e820: [mem 0x0000000000091000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000009d01fff] usable
BIOS-e820: [mem 0x0000000009d02000-0x0000000009ffffff] reserved
BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
BIOS-e820: [mem 0x000000000a200000-0x000000000a20bfff] ACPI NVS
BIOS-e820: [mem 0x000000000a20c000-0x00000000d91e8fff] usable
BIOS-e820: [mem 0x00000000d91e9000-0x00000000d93fcfff] reserved
BIOS-e820: [mem 0x00000000d93fd000-0x00000000d9585fff] ACPI data
BIOS-e820: [mem 0x00000000d9586000-0x00000000d96a7fff] ACPI NVS
BIOS-e820: [mem 0x00000000d96a8000-0x00000000da485fff] reserved
BIOS-e820: [mem 0x00000000da486000-0x00000000dcffffff] usable
BIOS-e820: [mem 0x00000000dd000000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fd000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000041f2fffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0x99d43018-0x99d50067] usable ==> usable
e820: update [mem 0x99d43018-0x99d50067] usable ==> usable
e820: update [mem 0x99d31018-0x99d42067] usable ==> usable
e820: update [mem 0x99d31018-0x99d42067] usable ==> usable
e820: update [mem 0x99d11018-0x99d30a57] usable ==> usable
e820: update [mem 0x99d11018-0x99d30a57] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x0000000000000fff] reserved
reserve setup_data: [mem 0x0000000000001000-0x000000000008ffff] usable
reserve setup_data: [mem 0x0000000000090000-0x0000000000090fff] reserved
reserve setup_data: [mem 0x0000000000091000-0x000000000009ffff] usable
reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x0000000009d01fff] usable
reserve setup_data: [mem 0x0000000009d02000-0x0000000009ffffff] reserved
reserve setup_data: [mem 0x000000000a000000-0x000000000a1fffff] usable
reserve setup_data: [mem 0x000000000a200000-0x000000000a20bfff] ACPI NVS
reserve setup_data: [mem 0x000000000a20c000-0x0000000099d11017] usable
reserve setup_data: [mem 0x0000000099d11018-0x0000000099d30a57] usable
reserve setup_data: [mem 0x0000000099d30a58-0x0000000099d31017] usable
reserve setup_data: [mem 0x0000000099d31018-0x0000000099d42067] usable
reserve setup_data: [mem 0x0000000099d42068-0x0000000099d43017] usable
reserve setup_data: [mem 0x0000000099d43018-0x0000000099d50067] usable
reserve setup_data: [mem 0x0000000099d50068-0x00000000d91e8fff] usable
reserve setup_data: [mem 0x00000000d91e9000-0x00000000d93fcfff] reserved
reserve setup_data: [mem 0x00000000d93fd000-0x00000000d9585fff] ACPI data
reserve setup_data: [mem 0x00000000d9586000-0x00000000d96a7fff] ACPI NVS
reserve setup_data: [mem 0x00000000d96a8000-0x00000000da485fff] reserved
reserve setup_data: [mem 0x00000000da486000-0x00000000dcffffff] usable
reserve setup_data: [mem 0x00000000dd000000-0x00000000dfffffff] reserved
reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
reserve setup_data: [mem 0x00000000fd000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000041f2fffff] usable
efi: EFI v2.70 by American Megatrends
efi: ACPI 2.0=0xd9522000 ACPI=0xd9522000 SMBIOS=0xda2c6000 SMBIOS 3.0=0xda2c5000 MEMATTR=0xd7957018 ESRT=0xd61b0d18
secureboot: Secure boot disabled
SMBIOS 3.2.0 present.
DMI: System manufacturer System Product Name/ROG CROSSHAIR VIII HERO (WI-FI), BIOS 1302 01/20/2020
tsc: Fast TSC calibration using PIT
tsc: Detected 3493.390 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x41f300 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFE0000000 write-back
3 base 0000D9BC0000 mask FFFFFFFF0000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000420000000 aka 16896M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
total RAM covered: 3583M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 128M num_reg: 4 lose cover RAM: 0G
e820: update [mem 0xd9bc0000-0xd9bcffff] usable ==> reserved
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
last_pfn = 0xdd000 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x00000000d61b0d18 to 0x00000000d61b0d50.
e820: update [mem 0xd61b0000-0xd61b0fff] usable ==> reserved
check: Scanning 1 areas for low memory corruption
Using GB pages for direct mapping
secureboot: Secure boot disabled
RAMDISK: [mem 0x3a555000-0x3d490fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000D9522000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000D95220A8 0000C4 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000D9530B28 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000D9522200 00E926 (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 0x00000000D9690E00 000040
ACPI: APIC 0x00000000D9530C40 00015E (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000D9530DA0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x00000000D9530DE8 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000D9530E88 0001CC (v02 ALASKA CPUSSDT 01072009 AMI 01072009)
ACPI: WSMT 0x00000000D9548EA0 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000D95310B0 008C98 (v02 AMD AMD ALIB 00000002 MSFT 04000000)
ACPI: SSDT 0x00000000D9539D48 00368A (v01 AMD AMD AOD 00000001 INTL 20120913)
ACPI: MCFG 0x00000000D953D3D8 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 0x00000000D953D418 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: SSDT 0x00000000D953D450 000024 (v01 AMD BIXBY 00001000 INTL 20120913)
ACPI: UEFI 0x00000000D953D478 000042 (v01 ALASKA A M I 00000002 01000013)
ACPI: BGRT 0x00000000D953D4C0 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: WPBT 0x00000000D953D4F8 00003C (v01 ALASKA A M I 00000001 ASUS 00000001)
ACPI: IVRS 0x00000000D953D538 0000D0 (v02 AMD AMD IVRS 00000001 AMD 00000000)
ACPI: PCCT 0x00000000D953D608 00006E (v01 AMD AMD PCCT 00000001 AMD 00000000)
ACPI: SSDT 0x00000000D953D678 007D49 (v01 AMD AMD CPU 00000001 AMD 00000001)
ACPI: CRAT 0x00000000D95453C8 001D58 (v01 AMD AMD CRAT 00000001 AMD 00000001)
ACPI: CDIT 0x00000000D9547120 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001)
ACPI: SSDT 0x00000000D9547150 001D4A (v01 AMD AmdTable 00000001 INTL 20120913)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000041f2fffff]
NODE_DATA(0) allocated [mem 0x41f2d5000-0x41f2fffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000041f2fffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000008ffff]
node 0: [mem 0x0000000000091000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x0000000009d01fff]
node 0: [mem 0x000000000a000000-0x000000000a1fffff]
node 0: [mem 0x000000000a20c000-0x00000000d91e8fff]
node 0: [mem 0x00000000da486000-0x00000000dcffffff]
node 0: [mem 0x0000000100000000-0x000000041f2fffff]
Zeroed struct page in unavailable ranges: 21257 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000041f2fffff]
On node 0 totalpages: 4173047
DMA zone: 64 pages used for memmap
DMA zone: 23 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 13994 pages used for memmap
DMA32 zone: 895577 pages, LIFO batch:63
Normal zone: 51148 pages used for memmap
Normal zone: 3273472 pages, LIFO batch:63
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 33, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 34, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228201 base: 0xfed00000
e820: update [mem 0xd2cfa000-0xd30c6fff] usable ==> reserved
smpboot: Allowing 32 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00090000-0x00090fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x09d02000-0x09ffffff]
PM: Registered nosave memory: [mem 0x0a200000-0x0a20bfff]
PM: Registered nosave memory: [mem 0x99d11000-0x99d11fff]
PM: Registered nosave memory: [mem 0x99d30000-0x99d30fff]
PM: Registered nosave memory: [mem 0x99d31000-0x99d31fff]
PM: Registered nosave memory: [mem 0x99d42000-0x99d42fff]
PM: Registered nosave memory: [mem 0x99d43000-0x99d43fff]
PM: Registered nosave memory: [mem 0x99d50000-0x99d50fff]
PM: Registered nosave memory: [mem 0xd2cfa000-0xd30c6fff]
PM: Registered nosave memory: [mem 0xd61b0000-0xd61b0fff]
PM: Registered nosave memory: [mem 0xd91e9000-0xd93fcfff]
PM: Registered nosave memory: [mem 0xd93fd000-0xd9585fff]
PM: Registered nosave memory: [mem 0xd9586000-0xd96a7fff]
PM: Registered nosave memory: [mem 0xd96a8000-0xda485fff]
PM: Registered nosave memory: [mem 0xdd000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfcffffff]
PM: Registered nosave memory: [mem 0xfd000000-0xffffffff]
[mem 0xe0000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1
percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144
pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31
Built 1 zonelists, mobility grouping on. Total pages: 4107818
Policy zone: Normal
You have booted with nomodeset. This means your GPU drivers are DISABLED
Any video related functionality will be severely degraded, and you may not even be able to suspend the system properly
Unless you actually understand what nomodeset does, you should reboot without enabling it
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16137956K/16692188K available (14339K kernel code, 2398K rwdata, 4956K rodata, 2716K init, 4988K bss, 554232K reserved, 0K cma-reserved)
random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
ftrace: allocating 44505 entries in 174 pages
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=32.
Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
NR_IRQS: 524544, nr_irqs: 1224, preallocated irqs: 16
random: crng done (trusting CPU's manufacturer)
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20190816
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
APIC: Switch to symmetric I/O mode setup
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x325aed0cf31, max_idle_ns: 440795313615 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 6986.78 BogoMIPS (lpj=13973560)
pid_max: default: 32768 minimum: 301
efi: memattr: Entry attributes invalid: RO and XP bits both cleared
efi: memattr: ! 0x000000090000-0x000000090fff [Runtime Code |RUN| | | | | | | | | | | ]
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
*** VALIDATE tmpfs ***
*** VALIDATE proc ***
*** VALIDATE cgroup1 ***
*** VALIDATE cgroup2 ***
x86/cpu: User Mode Instruction Prevention (UMIP) activated
LVT offset 1 assigned for vector 0xf9
LVT offset 2 assigned for vector 0xf4
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full AMD retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Freeing SMP alternatives memory: 40K
smpboot: CPU0: AMD Ryzen 9 3950X 16-Core Processor (family: 0x17, model: 0x71, stepping: 0x0)
Performance Events: Fam17h+ core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 #22 #23 #24 #25 #26 #27 #28 #29 #30 #31
smp: Brought up 1 node, 32 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 32 processors activated (223576.96 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20bfff] (49152 bytes)
PM: Registering ACPI NVS region [mem 0xd9586000-0xd96a7fff] (1187840 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 21:56:07, date: 2020-09-13
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1600034167.212:1): state=initialized audit_enabled=0 res=1
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
Detected 1 PCC Subspaces
Registering PCC driver as Mailbox controller
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 7 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: \_SB_.PCI0.SBRG.EC0_: Used as first EC
ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x2, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC used to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 2 GPEs in block 00 to 1F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME LTR]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec02fff window]
pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:1480] type 00 class 0x060000
pci 0000:00:00.2: [1022:1481] type 00 class 0x080600
pci 0000:00:01.0: [1022:1482] type 00 class 0x060000
pci 0000:00:01.2: [1022:1483] type 01 class 0x060400
pci 0000:00:01.2: enabling Extended Tags
pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [1022:1482] type 00 class 0x060000
pci 0000:00:03.0: [1022:1482] type 00 class 0x060000
pci 0000:00:03.1: [1022:1483] type 01 class 0x060400
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [1022:1482] type 00 class 0x060000
pci 0000:00:05.0: [1022:1482] type 00 class 0x060000
pci 0000:00:07.0: [1022:1482] type 00 class 0x060000
pci 0000:00:07.1: [1022:1484] type 01 class 0x060400
pci 0000:00:07.1: enabling Extended Tags
pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [1022:1482] type 00 class 0x060000
pci 0000:00:08.1: [1022:1484] type 01 class 0x060400
pci 0000:00:08.1: enabling Extended Tags
pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
pci 0000:00:08.2: [1022:1484] type 01 class 0x060400
pci 0000:00:08.2: enabling Extended Tags
pci 0000:00:08.2: PME# supported from D0 D3hot D3cold
pci 0000:00:08.3: [1022:1484] type 01 class 0x060400
pci 0000:00:08.3: enabling Extended Tags
pci 0000:00:08.3: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
pci 0000:00:18.0: [1022:1440] type 00 class 0x060000
pci 0000:00:18.1: [1022:1441] type 00 class 0x060000
pci 0000:00:18.2: [1022:1442] type 00 class 0x060000
pci 0000:00:18.3: [1022:1443] type 00 class 0x060000
pci 0000:00:18.4: [1022:1444] type 00 class 0x060000
pci 0000:00:18.5: [1022:1445] type 00 class 0x060000
pci 0000:00:18.6: [1022:1446] type 00 class 0x060000
pci 0000:00:18.7: [1022:1447] type 00 class 0x060000
pci 0000:01:00.0: [1022:57ad] type 01 class 0x060400
pci 0000:01:00.0: enabling Extended Tags
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16 GT/s x4 link at 0000:00:01.2 (capable of 126.024 Gb/s with 16 GT/s x8 link)
pci 0000:00:01.2: PCI bridge to [bus 01-09]
pci 0000:00:01.2: bridge window [io 0xd000-0xefff]
pci 0000:00:01.2: bridge window [mem 0xf7200000-0xf79fffff]
pci 0000:02:01.0: [1022:57a3] type 01 class 0x060400
pci 0000:02:01.0: enabling Extended Tags
pci 0000:02:01.0: PME# supported from D0 D3hot D3cold
pci 0000:02:03.0: [1022:57a3] type 01 class 0x060400
pci 0000:02:03.0: enabling Extended Tags
pci 0000:02:03.0: PME# supported from D0 D3hot D3cold
pci 0000:02:05.0: [1022:57a3] type 01 class 0x060400
pci 0000:02:05.0: enabling Extended Tags
pci 0000:02:05.0: PME# supported from D0 D3hot D3cold
pci 0000:02:06.0: [1022:57a3] type 01 class 0x060400
pci 0000:02:06.0: enabling Extended Tags
pci 0000:02:06.0: PME# supported from D0 D3hot D3cold
pci 0000:02:08.0: [1022:57a4] type 01 class 0x060400
pci 0000:02:08.0: enabling Extended Tags
pci 0000:02:08.0: PME# supported from D0 D3hot D3cold
pci 0000:02:09.0: [1022:57a4] type 01 class 0x060400
pci 0000:02:09.0: enabling Extended Tags
pci 0000:02:09.0: PME# supported from D0 D3hot D3cold
pci 0000:02:0a.0: [1022:57a4] type 01 class 0x060400
pci 0000:02:0a.0: enabling Extended Tags
pci 0000:02:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: PCI bridge to [bus 02-09]
pci 0000:01:00.0: bridge window [io 0xd000-0xefff]
pci 0000:01:00.0: bridge window [mem 0xf7200000-0xf79fffff]
pci 0000:03:00.0: [1987:5016] type 00 class 0x010802
pci 0000:03:00.0: reg 0x10: [mem 0xf7900000-0xf7903fff 64bit]
pci 0000:03:00.0: enabling Extended Tags
pci 0000:02:01.0: PCI bridge to [bus 03]
pci 0000:02:01.0: bridge window [mem 0xf7900000-0xf79fffff]
pci 0000:04:00.0: [10ec:8125] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [io 0xe000-0xe0ff]
pci 0000:04:00.0: reg 0x18: [mem 0xf7810000-0xf781ffff 64bit]
pci 0000:04:00.0: reg 0x20: [mem 0xf7820000-0xf7823fff 64bit]
pci 0000:04:00.0: reg 0x30: [mem 0xf7800000-0xf780ffff pref]
pci 0000:04:00.0: enabling Extended Tags
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: reg 0x1b4: [mem 0x00000000-0x0000ffff 64bit]
pci 0000:04:00.0: VF(n) BAR2 space: [mem 0x00000000-0x0006ffff 64bit] (contains BAR2 for 7 VFs)
pci 0000:04:00.0: reg 0x1bc: [mem 0x00000000-0x00003fff 64bit]
pci 0000:04:00.0: VF(n) BAR4 space: [mem 0x00000000-0x0001bfff 64bit] (contains BAR4 for 7 VFs)
pci 0000:02:03.0: PCI bridge to [bus 04]
pci 0000:02:03.0: bridge window [io 0xe000-0xefff]
pci 0000:02:03.0: bridge window [mem 0xf7800000-0xf78fffff]
pci 0000:05:00.0: [8086:1539] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [mem 0xf7700000-0xf771ffff]
pci 0000:05:00.0: reg 0x18: [io 0xd000-0xd01f]
pci 0000:05:00.0: reg 0x1c: [mem 0xf7720000-0xf7723fff]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:05.0: PCI bridge to [bus 05]
pci 0000:02:05.0: bridge window [io 0xd000-0xdfff]
pci 0000:02:05.0: bridge window [mem 0xf7700000-0xf77fffff]
pci 0000:06:00.0: [8086:2723] type 00 class 0x028000
pci 0000:06:00.0: reg 0x10: [mem 0xf7600000-0xf7603fff 64bit]
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:06.0: PCI bridge to [bus 06]
pci 0000:02:06.0: bridge window [mem 0xf7600000-0xf76fffff]
pci 0000:07:00.0: [1022:1485] type 00 class 0x130000
pci 0000:07:00.0: enabling Extended Tags
pci 0000:07:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16 GT/s x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with 16 GT/s x16 link)
pci 0000:07:00.1: [1022:149c] type 00 class 0x0c0330
pci 0000:07:00.1: reg 0x10: [mem 0xf7300000-0xf73fffff 64bit]
pci 0000:07:00.1: enabling Extended Tags
pci 0000:07:00.1: PME# supported from D0 D3hot D3cold
pci 0000:07:00.3: [1022:149c] type 00 class 0x0c0330
pci 0000:07:00.3: reg 0x10: [mem 0xf7200000-0xf72fffff 64bit]
pci 0000:07:00.3: enabling Extended Tags
pci 0000:07:00.3: PME# supported from D0 D3hot D3cold
pci 0000:02:08.0: PCI bridge to [bus 07]
pci 0000:02:08.0: bridge window [mem 0xf7200000-0xf73fffff]
pci 0000:08:00.0: [1022:7901] type 00 class 0x010601
pci 0000:08:00.0: reg 0x24: [mem 0xf7500000-0xf75007ff]
pci 0000:08:00.0: enabling Extended Tags
pci 0000:08:00.0: PME# supported from D3hot D3cold
pci 0000:08:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16 GT/s x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with 16 GT/s x16 link)
pci 0000:02:09.0: PCI bridge to [bus 08]
pci 0000:02:09.0: bridge window [mem 0xf7500000-0xf75fffff]
pci 0000:09:00.0: [1022:7901] type 00 class 0x010601
pci 0000:09:00.0: reg 0x24: [mem 0xf7400000-0xf74007ff]
pci 0000:09:00.0: enabling Extended Tags
pci 0000:09:00.0: PME# supported from D3hot D3cold
pci 0000:09:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16 GT/s x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with 16 GT/s x16 link)
pci 0000:02:0a.0: PCI bridge to [bus 09]
pci 0000:02:0a.0: bridge window [mem 0xf7400000-0xf74fffff]
pci 0000:0a:00.0: [10de:1b82] type 00 class 0x030000
pci 0000:0a:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
pci 0000:0a:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:0a:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:0a:00.0: reg 0x24: [io 0xf000-0xf07f]
pci 0000:0a:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
pci 0000:0a:00.0: BAR 1: assigned to efifb
pci 0000:0a:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x16 link at 0000:00:03.1 (capable of 126.016 Gb/s with 8 GT/s x16 link)
pci 0000:0a:00.1: [10de:10f0] type 00 class 0x040300
pci 0000:0a:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
pci 0000:00:03.1: PCI bridge to [bus 0a]
pci 0000:00:03.1: bridge window [io 0xf000-0xffff]
pci 0000:00:03.1: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:0b:00.0: [1022:148a] type 00 class 0x130000
pci 0000:0b:00.0: enabling Extended Tags
pci 0000:00:07.1: PCI bridge to [bus 0b]
pci 0000:0c:00.0: [1022:1485] type 00 class 0x130000
pci 0000:0c:00.0: enabling Extended Tags
pci 0000:0c:00.1: [1022:1486] type 00 class 0x108000
pci 0000:0c:00.1: reg 0x18: [mem 0xf7b00000-0xf7bfffff]
pci 0000:0c:00.1: reg 0x24: [mem 0xf7c08000-0xf7c09fff]
pci 0000:0c:00.1: enabling Extended Tags
pci 0000:0c:00.3: [1022:149c] type 00 class 0x0c0330
pci 0000:0c:00.3: reg 0x10: [mem 0xf7a00000-0xf7afffff 64bit]
pci 0000:0c:00.3: enabling Extended Tags
pci 0000:0c:00.3: PME# supported from D0 D3hot D3cold
pci 0000:0c:00.4: [1022:1487] type 00 class 0x040300
pci 0000:0c:00.4: reg 0x10: [mem 0xf7c00000-0xf7c07fff]
pci 0000:0c:00.4: enabling Extended Tags
pci 0000:0c:00.4: PME# supported from D0 D3hot D3cold
pci 0000:00:08.1: PCI bridge to [bus 0c]
pci 0000:00:08.1: bridge window [mem 0xf7a00000-0xf7cfffff]
pci 0000:0d:00.0: [1022:7901] type 00 class 0x010601
pci 0000:0d:00.0: reg 0x24: [mem 0xf7e00000-0xf7e007ff]
pci 0000:0d:00.0: enabling Extended Tags
pci 0000:0d:00.0: PME# supported from D3hot D3cold
pci 0000:00:08.2: PCI bridge to [bus 0d]
pci 0000:00:08.2: bridge window [mem 0xf7e00000-0xf7efffff]
pci 0000:0e:00.0: [1022:7901] type 00 class 0x010601
pci 0000:0e:00.0: reg 0x24: [mem 0xf7d00000-0xf7d007ff]
pci 0000:0e:00.0: enabling Extended Tags
pci 0000:0e:00.0: PME# supported from D3hot D3cold
pci 0000:00:08.3: PCI bridge to [bus 0e]
pci 0000:00:08.3: bridge window [mem 0xf7d00000-0xf7dfffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x2, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC used to handle transactions and events
iommu: Default domain type: Translated
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
pci 0000:0a:00.0: vgaarb: bridge control possible
pci 0000:0a:00.0: vgaarb: setting as boot device
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
Expanded resource Reserved due to conflict with PCI Bus 0000:00
e820: reserve RAM buffer [mem 0x09d02000-0x0bffffff]
e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
e820: reserve RAM buffer [mem 0x99d11018-0x9bffffff]
e820: reserve RAM buffer [mem 0x99d31018-0x9bffffff]
e820: reserve RAM buffer [mem 0x99d43018-0x9bffffff]
e820: reserve RAM buffer [mem 0xd2cfa000-0xd3ffffff]
e820: reserve RAM buffer [mem 0xd61b0000-0xd7ffffff]
e820: reserve RAM buffer [mem 0xd91e9000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdd000000-0xdfffffff]
e820: reserve RAM buffer [mem 0x41f300000-0x41fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
*** VALIDATE bpf ***
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
*** VALIDATE ramfs ***
*** VALIDATE hugetlbfs ***
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0xfd000000-0xfd0fffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x0290-0x029f] has been reserved
system 00:03: [io 0x0200-0x021f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: [io 0x040b] has been reserved
system 00:04: [io 0x04d6] has been reserved
system 00:04: [io 0x0c00-0x0c01] has been reserved
system 00:04: [io 0x0c14] has been reserved
system 00:04: [io 0x0c50-0x0c51] has been reserved
system 00:04: [io 0x0c52] has been reserved
system 00:04: [io 0x0c6c] has been reserved
system 00:04: [io 0x0c6f] has been reserved
system 00:04: [io 0x0cd0-0x0cd1] has been reserved
system 00:04: [io 0x0cd2-0x0cd3] has been reserved
system 00:04: [io 0x0cd4-0x0cd5] has been reserved
system 00:04: [io 0x0cd6-0x0cd7] has been reserved
system 00:04: [io 0x0cd8-0x0cdf] has been reserved
system 00:04: [io 0x0800-0x089f] has been reserved
system 00:04: [io 0x0b00-0x0b0f] has been reserved
system 00:04: [io 0x0b20-0x0b3f] has been reserved
system 00:04: [io 0x0900-0x090f] has been reserved
system 00:04: [io 0x0910-0x091f] has been reserved
system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved
system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved
system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved
system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:04: [mem 0xff000000-0xffffffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 5 devices
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci_bus 0000:00: max bus depth: 3 pci_try_num: 4
pci 0000:02:01.0: PCI bridge to [bus 03]
pci 0000:02:01.0: bridge window [mem 0xf7900000-0xf79fffff]
pci 0000:04:00.0: BAR 9: assigned [mem 0xf7830000-0xf789ffff 64bit]
pci 0000:04:00.0: BAR 11: assigned [mem 0xf78a0000-0xf78bbfff 64bit]
pci 0000:02:03.0: PCI bridge to [bus 04]
pci 0000:02:03.0: bridge window [io 0xe000-0xefff]
pci 0000:02:03.0: bridge window [mem 0xf7800000-0xf78fffff]
pci 0000:02:05.0: PCI bridge to [bus 05]
pci 0000:02:05.0: bridge window [io 0xd000-0xdfff]
pci 0000:02:05.0: bridge window [mem 0xf7700000-0xf77fffff]
pci 0000:02:06.0: PCI bridge to [bus 06]
pci 0000:02:06.0: bridge window [mem 0xf7600000-0xf76fffff]
pci 0000:02:08.0: PCI bridge to [bus 07]
pci 0000:02:08.0: bridge window [mem 0xf7200000-0xf73fffff]
pci 0000:02:09.0: PCI bridge to [bus 08]
pci 0000:02:09.0: bridge window [mem 0xf7500000-0xf75fffff]
pci 0000:02:0a.0: PCI bridge to [bus 09]
pci 0000:02:0a.0: bridge window [mem 0xf7400000-0xf74fffff]
pci 0000:01:00.0: PCI bridge to [bus 02-09]
pci 0000:01:00.0: bridge window [io 0xd000-0xefff]
pci 0000:01:00.0: bridge window [mem 0xf7200000-0xf79fffff]
pci 0000:00:01.2: PCI bridge to [bus 01-09]
pci 0000:00:01.2: bridge window [io 0xd000-0xefff]
pci 0000:00:01.2: bridge window [mem 0xf7200000-0xf79fffff]
pci 0000:00:03.1: PCI bridge to [bus 0a]
pci 0000:00:03.1: bridge window [io 0xf000-0xffff]
pci 0000:00:03.1: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:00:07.1: PCI bridge to [bus 0b]
pci 0000:00:08.1: PCI bridge to [bus 0c]
pci 0000:00:08.1: bridge window [mem 0xf7a00000-0xf7cfffff]
pci 0000:00:08.2: PCI bridge to [bus 0d]
pci 0000:00:08.2: bridge window [mem 0xf7e00000-0xf7efffff]
pci 0000:00:08.3: PCI bridge to [bus 0e]
pci 0000:00:08.3: bridge window [mem 0xf7d00000-0xf7dfffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec02fff window]
pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
pci_bus 0000:01: resource 0 [io 0xd000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf7200000-0xf79fffff]
pci_bus 0000:02: resource 0 [io 0xd000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xf7200000-0xf79fffff]
pci_bus 0000:03: resource 1 [mem 0xf7900000-0xf79fffff]
pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
pci_bus 0000:04: resource 1 [mem 0xf7800000-0xf78fffff]
pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:05: resource 1 [mem 0xf7700000-0xf77fffff]
pci_bus 0000:06: resource 1 [mem 0xf7600000-0xf76fffff]
pci_bus 0000:07: resource 1 [mem 0xf7200000-0xf73fffff]
pci_bus 0000:08: resource 1 [mem 0xf7500000-0xf75fffff]
pci_bus 0000:09: resource 1 [mem 0xf7400000-0xf74fffff]
pci_bus 0000:0a: resource 0 [io 0xf000-0xffff]
pci_bus 0000:0a: resource 1 [mem 0xf6000000-0xf70fffff]
pci_bus 0000:0a: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
pci_bus 0000:0c: resource 1 [mem 0xf7a00000-0xf7cfffff]
pci_bus 0000:0d: resource 1 [mem 0xf7e00000-0xf7efffff]
pci_bus 0000:0e: resource 1 [mem 0xf7d00000-0xf7dfffff]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:0a:00.1: D0 power state depends on 0000:0a:00.0
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Initramfs unpacking failed: Decoding failed
Freeing initrd memory: 48368K
pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
pci 0000:00:01.0: Adding to iommu group 0
pci 0000:00:01.2: Adding to iommu group 1
pci 0000:00:02.0: Adding to iommu group 2
pci 0000:00:03.0: Adding to iommu group 3
pci 0000:00:03.1: Adding to iommu group 4
pci 0000:00:04.0: Adding to iommu group 5
pci 0000:00:05.0: Adding to iommu group 6
pci 0000:00:07.0: Adding to iommu group 7
pci 0000:00:07.1: Adding to iommu group 8
pci 0000:00:08.0: Adding to iommu group 9
pci 0000:00:08.1: Adding to iommu group 10
pci 0000:00:08.2: Adding to iommu group 11
pci 0000:00:08.3: Adding to iommu group 12
pci 0000:00:14.0: Adding to iommu group 13
pci 0000:00:14.3: Adding to iommu group 13
pci 0000:00:18.0: Adding to iommu group 14
pci 0000:00:18.1: Adding to iommu group 14
pci 0000:00:18.2: Adding to iommu group 14
pci 0000:00:18.3: Adding to iommu group 14
pci 0000:00:18.4: Adding to iommu group 14
pci 0000:00:18.5: Adding to iommu group 14
pci 0000:00:18.6: Adding to iommu group 14
pci 0000:00:18.7: Adding to iommu group 14
pci 0000:01:00.0: Adding to iommu group 15
pci 0000:02:01.0: Adding to iommu group 16
pci 0000:02:03.0: Adding to iommu group 17
pci 0000:02:05.0: Adding to iommu group 18
pci 0000:02:06.0: Adding to iommu group 19
pci 0000:02:08.0: Adding to iommu group 20
pci 0000:02:09.0: Adding to iommu group 21
pci 0000:02:0a.0: Adding to iommu group 22
pci 0000:03:00.0: Adding to iommu group 23
pci 0000:04:00.0: Adding to iommu group 24
pci 0000:05:00.0: Adding to iommu group 25
pci 0000:06:00.0: Adding to iommu group 26
pci 0000:07:00.0: Adding to iommu group 20
pci 0000:07:00.1: Adding to iommu group 20
pci 0000:07:00.3: Adding to iommu group 20
pci 0000:08:00.0: Adding to iommu group 21
pci 0000:09:00.0: Adding to iommu group 22
pci 0000:0a:00.0: Adding to iommu group 27
pci 0000:0a:00.1: Adding to iommu group 27
pci 0000:0b:00.0: Adding to iommu group 28
pci 0000:0c:00.0: Adding to iommu group 29
pci 0000:0c:00.1: Adding to iommu group 30
pci 0000:0c:00.3: Adding to iommu group 31
pci 0000:0c:00.4: Adding to iommu group 32
pci 0000:0d:00.0: Adding to iommu group 33
pci 0000:0e:00.0: Adding to iommu group 34
pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
pci 0000:00:00.2: AMD-Vi: Extended features (0x58f77ef22294ade):
PPR X2APIC NX GT IA GA PC GA_vAPIC
AMD-Vi: Interrupt remapping enabled
AMD-Vi: Virtual APIC enabled
AMD-Vi: X2APIC enabled
AMD-Vi: Lazy IO/TLB flushing enabled
amd_uncore: AMD NB counters detected
amd_uncore: AMD LLC counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000003ff)
perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=22 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.31)
*** VALIDATE fuse ***
*** VALIDATE fuse ***
Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler mq-deadline registered
pcieport 0000:00:07.1: AER: enabled with IRQ 30
pcieport 0000:00:08.1: AER: enabled with IRQ 31
pcieport 0000:00:08.2: AER: enabled with IRQ 32
pcieport 0000:00:08.3: AER: enabled with IRQ 33
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: showing boot graphics
efifb: framebuffer at 0xe0000000, using 34560k, total 34560k
efifb: mode is 3840x2160x32, linelength=16384, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
fbcon: Deferring console take-over
fb0: EFI VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:07:00.1: xHCI Host Controller
xhci_hcd 0000:07:00.1: new USB bus registered, assigned bus number 1
xhci_hcd 0000:07:00.1: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.4.0-47-generic xhci-hcd
usb usb1: SerialNumber: 0000:07:00.1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000007) is beyond end of object (length 0x6) (20190816/exoparg2-393)
No Local Variables are initialized for Method [_PLD]
No Arguments are initialized for method [_PLD]
ACPI Error: Aborting method \_SB.PCI0.BXBR.BYUP.BYD8.XHC1.RHUB.PRT6._PLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
xhci_hcd 0000:07:00.1: xHCI Host Controller
xhci_hcd 0000:07:00.1: new USB bus registered, assigned bus number 2
xhci_hcd 0000:07:00.1: Host supports USB 3.1 Enhanced SuperSpeed
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.4.0-47-generic xhci-hcd
usb usb2: SerialNumber: 0000:07:00.1
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
xhci_hcd 0000:07:00.3: xHCI Host Controller
xhci_hcd 0000:07:00.3: new USB bus registered, assigned bus number 3
xhci_hcd 0000:07:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 5.4.0-47-generic xhci-hcd
usb usb3: SerialNumber: 0000:07:00.3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
xhci_hcd 0000:07:00.3: xHCI Host Controller
xhci_hcd 0000:07:00.3: new USB bus registered, assigned bus number 4
xhci_hcd 0000:07:00.3: Host supports USB 3.1 Enhanced SuperSpeed
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 5.4.0-47-generic xhci-hcd
usb usb4: SerialNumber: 0000:07:00.3
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
xhci_hcd 0000:0c:00.3: xHCI Host Controller
xhci_hcd 0000:0c:00.3: new USB bus registered, assigned bus number 5
xhci_hcd 0000:0c:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 5.4.0-47-generic xhci-hcd
usb usb5: SerialNumber: 0000:0c:00.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 4 ports detected
xhci_hcd 0000:0c:00.3: xHCI Host Controller
xhci_hcd 0000:0c:00.3: new USB bus registered, assigned bus number 6
xhci_hcd 0000:0c:00.3: Host supports USB 3.1 Enhanced SuperSpeed
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 5.4.0-47-generic xhci-hcd
usb usb6: SerialNumber: 0000:0c:00.3
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: registered as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: [email protected]
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
drop_monitor: Initializing network drop monitor service
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: CPU0: patch_level=0x08701013
microcode: CPU1: patch_level=0x08701013
microcode: CPU2: patch_level=0x08701013
microcode: CPU3: patch_level=0x08701013
microcode: CPU4: patch_level=0x08701013
microcode: CPU5: patch_level=0x08701013
microcode: CPU6: patch_level=0x08701013
microcode: CPU7: patch_level=0x08701013
microcode: CPU8: patch_level=0x08701013
microcode: CPU9: patch_level=0x08701013
microcode: CPU10: patch_level=0x08701013
microcode: CPU11: patch_level=0x08701013
microcode: CPU12: patch_level=0x08701013
microcode: CPU13: patch_level=0x08701013
microcode: CPU14: patch_level=0x08701013
microcode: CPU15: patch_level=0x08701013
microcode: CPU16: patch_level=0x08701013
microcode: CPU17: patch_level=0x08701013
microcode: CPU18: patch_level=0x08701013
microcode: CPU19: patch_level=0x08701013
microcode: CPU20: patch_level=0x08701013
microcode: CPU21: patch_level=0x08701013
microcode: CPU22: patch_level=0x08701013
microcode: CPU23: patch_level=0x08701013
microcode: CPU24: patch_level=0x08701013
microcode: CPU25: patch_level=0x08701013
microcode: CPU26: patch_level=0x08701013
microcode: CPU27: patch_level=0x08701013
microcode: CPU28: patch_level=0x08701013
microcode: CPU29: patch_level=0x08701013
microcode: CPU30: patch_level=0x08701013
microcode: CPU31: patch_level=0x08701013
microcode: Microcode Update Driver: v2.2.
*** VALIDATE rdt ***
resctrl: L3 allocation detected
resctrl: L3DATA allocation detected
resctrl: L3CODE allocation detected
resctrl: MB allocation detected
resctrl: L3 monitoring detected
IPI shorthand broadcast: enabled
sched_clock: Marking stable (491570964, 312283575)->(901166879, -97312340)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 52d16be8a47f13ed569e4734dd7da053d9d3759d'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type big_key registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'ASUSTeK MotherBoard SW Key Certificate: da83b990422ebc8c441f8d8b039a65a2'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'ASUSTeK Notebook SW Key Certificate: b8e581e4df77a5bb4282d5ccfc00c071'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha1
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM: Magic number: 4:116:955
memory memory8: hash matches
rtc_cmos 00:02: setting system clock to 2020-09-13T21:56:08 UTC (1600034168)
acpi_cpufreq: overriding BIOS provided _PSD data
Freeing unused decrypted memory: 2040K
Freeing unused kernel image memory: 2716K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel image memory: 2008K
Freeing unused kernel image memory: 1188K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
acpi PNP0C14:04: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
dca service started, version 1.12.1
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
ahci 0000:08:00.0: version 3.0
ahci 0000:08:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:08:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
nvme nvme0: pci function 0000:03:00.0
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
scsi host0: ahci
ata1: SATA max UDMA/133 abar m2048@0xf7500000 port 0xf7500100 irq 62
ahci 0000:09:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:09:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
scsi host1: ahci
ata2: SATA max UDMA/133 abar m2048@0xf7400000 port 0xf7400100 irq 64
ahci 0000:0d:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:0d:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
scsi host2: ahci
ata3: SATA max UDMA/133 abar m2048@0xf7e00000 port 0xf7e00100 irq 71
ahci 0000:0e:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:0e:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
scsi host3: ahci
ata4: SATA max UDMA/133 abar m2048@0xf7d00000 port 0xf7d00100 irq 73
libphy: r8169: probed
r8169 0000:04:00.0 eth0: RTL8125, 04:d9:f5:34:b1:6d, XID 609, IRQ 74
r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
r8169 0000:04:00.0 enp4s0: renamed from eth0
pps pps0: new PPS source ptp0
igb 0000:05:00.0: added PHC on eth0
igb 0000:05:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:05:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 04:d9:f5:34:b1:6c
igb 0000:05:00.0: eth0: PBA No: FFFFFF-0FF
igb 0000:05:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
igb 0000:05:00.0 enp5s0: renamed from eth0
nvme nvme0: missing or invalid SUBNQN field.
nvme nvme0: Shutdown timeout set to 10 seconds
nvme nvme0: 8/0/0 default/read/poll queues
nvme0n1: p1 p2
usb 1-5: new high-speed USB device number 2 using xhci_hcd
usb 3-2: new high-speed USB device number 2 using xhci_hcd
ata2: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
usb 1-5: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98
usb 1-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-5: Product: USB2.0 Hub
usb 3-2: New USB device found, idVendor=174c, idProduct=2074, bcdDevice= 0.01
usb 3-2: New USB device strings: Mfr=2, Product=3, SerialNumber=0
usb 3-2: Product: ASM107x
usb 3-2: Manufacturer: ASUS TEK.
hub 1-5:1.0: USB hub found
hub 1-5:1.0: 4 ports detected
hub 3-2:1.0: USB hub found
hub 3-2:1.0: 4 ports detected
usb 2-1: new SuperSpeedPlus Gen 2 USB device number 2 using xhci_hcd
usb 4-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
usb 2-1: New USB device found, idVendor=152d, idProduct=0583, bcdDevice= 2.08
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: Product: SABRENT
usb 2-1: Manufacturer: SABRENT
usb 2-1: SerialNumber: DD56419883896
usbcore: registered new interface driver usb-storage
scsi host4: uas
usbcore: registered new interface driver uas
scsi 4:0:0:0: Direct-Access SABRENT 0208 PQ: 0 ANSI: 6
sd 4:0:0:0: Attached scsi generic sg0 type 0
sd 4:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 4:0:0:0: [sda] 4096-byte physical blocks
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 5f 00 00 08
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
usb 4-2: New USB device found, idVendor=174c, idProduct=3074, bcdDevice= 0.01
usb 4-2: New USB device strings: Mfr=2, Product=3, SerialNumber=0
usb 4-2: Product: ASM107x
usb 4-2: Manufacturer: ASUS TEK.
usb 1-6: new full-speed USB device number 3 using xhci_hcd
hub 4-2:1.0: USB hub found
hub 4-2:1.0: 4 ports detected
usb 1-6: New USB device found, idVendor=8087, idProduct=0029, bcdDevice= 0.01
usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 3-2.3: new high-speed USB device number 3 using xhci_hcd
tsc: Refined TSC clocksource calibration: 3493.436 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x325b186289d, max_idle_ns: 440795326624 ns
clocksource: Switched to clocksource tsc
usb 1-5.3: new full-speed USB device number 4 using xhci_hcd
usb 3-2.3: New USB device found, idVendor=0451, idProduct=8142, bcdDevice= 1.00
usb 3-2.3: New USB device strings: Mfr=0, Product=0, SerialNumber=1
usb 3-2.3: SerialNumber: BD040861B5A0
usb 1-5.3: config 1 has an invalid interface number: 2 but max is 1
usb 1-5.3: config 1 has no interface number 1
usb 1-5.3: New USB device found, idVendor=0b05, idProduct=18f3, bcdDevice= 1.00
usb 1-5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5.3: Product: AURA LED Controller
usb 1-5.3: Manufacturer: AsusTek Computer Inc.
usb 1-5.3: SerialNumber: 9876543210
hub 3-2.3:1.0: USB hub found
hub 3-2.3:1.0: 4 ports detected
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
hid-generic 0003:0B05:18F3.0001: hiddev0,hidraw0: USB HID v1.11 Device [AsusTek Computer Inc. AURA LED Controller] on usb-0000:07:00.1-5.3/input2
fbcon: Taking over console
Console: switching to colour frame buffer device 240x67
usb 4-2.4: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null)
usb 4-2.4: New USB device found, idVendor=0451, idProduct=8140, bcdDevice= 1.00
usb 4-2.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 4-2.4:1.0: USB hub found
hub 4-2.4:1.0: 4 ports detected
usb 3-2.3.1: new low-speed USB device number 4 using xhci_hcd
usb 3-2.3.1: New USB device found, idVendor=04f2, idProduct=0833, bcdDevice= 2.30
usb 3-2.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2.3.1: Product: USB Keyboard
usb 3-2.3.1: Manufacturer: CHICONY
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/0000:02:08.0/0000:07:00.3/usb3/3-2/3-2.3/3-2.3.1/3-2.3.1:1.0/0003:04F2:0833.0002/input/input2
hid-generic 0003:04F2:0833.0002: input,hidraw1: USB HID v1.11 Keyboard [CHICONY USB Keyboard] on usb-0000:07:00.3-2.3.1/input0
systemd[1]: Inserted module 'autofs4'
input: CHICONY USB Keyboard System Control as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/0000:02:08.0/0000:07:00.3/usb3/3-2/3-2.3/3-2.3.1/3-2.3.1:1.1/0003:04F2:0833.0003/input/input3
systemd[1]: systemd 245.4-4ubuntu3.2 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
input: CHICONY USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/0000:02:08.0/0000:07:00.3/usb3/3-2/3-2.3/3-2.3.1/3-2.3.1:1.1/0003:04F2:0833.0003/input/input4
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/0000:02:08.0/0000:07:00.3/usb3/3-2/3-2.3/3-2.3.1/3-2.3.1:1.1/0003:04F2:0833.0003/input/input5
hid-generic 0003:04F2:0833.0003: input,hiddev1,hidraw2: USB HID v1.11 Device [CHICONY USB Keyboard] on usb-0000:07:00.3-2.3.1/input1
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
usb 3-2.3.2: new full-speed USB device number 5 using xhci_hcd
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slices.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: Finished Uncomplicated firewall.
EXT4-fs (nvme0n1p2): re-mounted. Opts: errors=remount-ro
systemd[1]: [email protected]: Succeeded.
systemd[1]: Finished Load Kernel Module drm.
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Activating swap /swapfile...
systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Create System Users...
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
usb 3-2.3.2: New USB device found, idVendor=046d, idProduct=c084, bcdDevice= 7.03
usb 3-2.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-2.3.2: Product: G203 Prodigy Gaming Mouse
usb 3-2.3.2: Manufacturer: Logitech
usb 3-2.3.2: SerialNumber: 087E37793234
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounting Kernel Configuration File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Finished Load/Save Random Seed.
systemd[1]: Mounted Kernel Configuration File System.
systemd[1]: Finished Set the console keyboard layout.
systemd[1]: Finished Apply Kernel Variables.
systemd[1]: Finished udev Coldplug all Devices.
systemd[1]: Finished Create System Users.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Finished Create Static Device Nodes in /dev.
systemd[1]: Reached target Local File Systems (Pre).
systemd[1]: Mounting Mount unit for core18, revision 1880...
systemd[1]: Mounting Mount unit for core18, revision 1885...
systemd[1]: Mounting Mount unit for gnome-3-34-1804, revision 36...
systemd[1]: Mounting Mount unit for gtk-common-themes, revision 1506...
systemd[1]: Mounting Mount unit for snap-store, revision 467...
Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SSFS
systemd[1]: Mounting Mount unit for snapd, revision 8542...
systemd[1]: Mounting Mount unit for snapd, revision 8790...
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Activated swap /swapfile.
systemd[1]: Reached target Swap.
systemd[1]: Started Journal Service.
systemd-journald[501]: Received client request to flush runtime journal.
input: Logitech G203 Prodigy Gaming Mouse as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/0000:02:08.0/0000:07:00.3/usb3/3-2/3-2.3/3-2.3.2/3-2.3.2:1.0/0003:046D:C084.0004/input/input6
hid-generic 0003:046D:C084.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech G203 Prodigy Gaming Mouse] on usb-0000:07:00.3-2.3.2/input0
systemd-journald[501]: File /var/log/journal/f712ca1087234ad79235416936857038/system.journal corrupted or uncleanly shut down, renaming and replacing.
input: Logitech G203 Prodigy Gaming Mouse Keyboard as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/0000:02:08.0/0000:07:00.3/usb3/3-2/3-2.3/3-2.3.2/3-2.3.2:1.1/0003:046D:C084.0005/input/input7
input: Logitech G203 Prodigy Gaming Mouse Consumer Control as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/0000:02:08.0/0000:07:00.3/usb3/3-2/3-2.3/3-2.3.2/3-2.3.2:1.1/0003:046D:C084.0005/input/input8
input: Logitech G203 Prodigy Gaming Mouse System Control as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/0000:02:08.0/0000:07:00.3/usb3/3-2/3-2.3/3-2.3.2/3-2.3.2:1.1/0003:046D:C084.0005/input/input9
hid-generic 0003:046D:C084.0005: input,hiddev2,hidraw4: USB HID v1.11 Keyboard [Logitech G203 Prodigy Gaming Mouse] on usb-0000:07:00.3-2.3.2/input1
ccp 0000:0c:00.1: enabling device (0000 -> 0002)
ccp 0000:0c:00.1: ccp enabled
asus_wmi: ASUS WMI generic driver loaded
cryptd: max_cpu_qlen set to 1000
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input12
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
iwlwifi 0000:06:00.0: enabling device (0000 -> 0002)
usbcore: registered new interface driver btusb
Bluetooth: hci0: Bootloader revision 0.3 build 0 week 24 2017
Bluetooth: hci0: Device revision is 1
Bluetooth: hci0: Secure boot is enabled
Bluetooth: hci0: OTP lock is enabled
Bluetooth: hci0: API lock is enabled
Bluetooth: hci0: Debug lock is disabled
Bluetooth: hci0: Minimum firmware build 1 week 10 2014
iwlwifi 0000:06:00.0: Direct firmware load for iwlwifi-cc-a0-50.ucode failed with error -2
iwlwifi 0000:06:00.0: Direct firmware load for iwlwifi-cc-a0-49.ucode failed with error -2
Bluetooth: hci0: Found device firmware: intel/ibt-20-1-3.sfi
iwlwifi 0000:06:00.0: TLV_FW_FSEQ_VERSION: FSEQ Version: 43.2.23.17
iwlwifi 0000:06:00.0: Found debug destination: EXTERNAL_DRAM
iwlwifi 0000:06:00.0: Found debug configuration: 0
iwlwifi 0000:06:00.0: loaded firmware version 48.4fa0041f.0 op_mode iwlmvm
iwlwifi 0000:06:00.0: Detected Intel(R) Wi-Fi 6 AX200 160MHz, REV=0x340
snd_hda_intel 0000:0a:00.1: enabling device (0000 -> 0002)
snd_hda_intel 0000:0a:00.1: Disabling MSI
snd_hda_intel 0000:0a:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:0c:00.4: enabling device (0000 -> 0002)
iwlwifi 0000:06:00.0: Applying debug destination EXTERNAL_DRAM
iwlwifi 0000:06:00.0: Allocated 0x00400000 bytes for firmware monitor.
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC1220: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC1D0: inputs:
snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:0c:00.4/sound/card1/input13
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:0c:00.4/sound/card1/input14
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:0c:00.4/sound/card1/input15
input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:0c:00.4/sound/card1/input16
input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:0c:00.4/sound/card1/input17
input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:0c:00.4/sound/card1/input18
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:0c:00.4/sound/card1/input19
nvidia: loading out-of-tree module taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
nvidia-nvlink: Nvlink Core is being initialized, major device number 236
kvm: disabled by bios
nvidia 0000:0a:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
iwlwifi 0000:06:00.0: base HW address: 38:00:25:4d:74:98
thermal thermal_zone0: failed to read out thermal zone (-61)
iwlwifi 0000:06:00.0 wlp6s0: renamed from wlan0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 450.66 Wed Aug 12 19:42:48 UTC 2020
sda: sda1
sd 4:0:0:0: [sda] Attached SCSI disk
kvm: disabled by bios
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 450.66 Wed Aug 12 19:37:58 UTC 2020
MCE: In-kernel MCE decoding enabled.
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[drm] [nvidia-drm] [GPU ID 0x00000a00] Loading driver
[drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:0a:00.0 on minor 0
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
kvm: disabled by bios
audit: type=1400 audit(1600034171.526:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=889 comm="apparmor_parser"
audit: type=1400 audit(1600034171.526:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=879 comm="apparmor_parser"
audit: type=1400 audit(1600034171.526:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=879 comm="apparmor_parser"
audit: type=1400 audit(1600034171.526:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=885 comm="apparmor_parser"
audit: type=1400 audit(1600034171.530:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=888 comm="apparmor_parser"
audit: type=1400 audit(1600034171.530:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=883 comm="apparmor_parser"
audit: type=1400 audit(1600034171.530:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=877 comm="apparmor_parser"
audit: type=1400 audit(1600034171.530:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=887 comm="apparmor_parser"
audit: type=1400 audit(1600034171.530:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=887 comm="apparmor_parser"
kvm: disabled by bios
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
kvm: disabled by bios
kvm: disabled by bios
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
kvm: disabled by bios
Bluetooth: BNEP filters: protocol multicast
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
Bluetooth: BNEP socket layer initialized
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input20
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input21
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input22
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input23
kvm: disabled by bios
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
kvm: disabled by bios
Bluetooth: hci0: Waiting for firmware download to complete
Bluetooth: hci0: Firmware loaded in 1208240 usecs
Bluetooth: hci0: Waiting for device to boot
Bluetooth: hci0: Device booted in 14640 usecs
Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-20-1-3.ddc
Bluetooth: hci0: Failed to send Intel_Write_DDC (-22)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
kvm: disabled by bios
NET: Registered protocol family 38
kvm: disabled by bios
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
kvm: disabled by bios
kvm: disabled by bios
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
kvm: disabled by bios
RTL8125 2.5Gbps internal r8169-400:00: attached PHY driver [RTL8125 2.5Gbps internal] (mii_bus:phy_addr=r8169-400:00, irq=IGNORE)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
kvm: disabled by bios
r8169 0000:04:00.0 enp4s0: Link is Down
iwlwifi 0000:06:00.0: Applying debug destination EXTERNAL_DRAM
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
kvm: disabled by bios
iwlwifi 0000:06:00.0: FW already configured (0) - re-configuring
kvm: disabled by bios
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
kvm: disabled by bios
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
kvm: disabled by bios
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
kvm: disabled by bios
kvm: disabled by bios
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
kvm: disabled by bios
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
kvm: disabled by bios
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
kvm: disabled by bios
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
kvm: disabled by bios
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
kvm: disabled by bios
r8169 0000:04:00.0 enp4s0: Link is Up - 1Gbps/Full - flow control rx/tx
IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
kvm: disabled by bios
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
kvm: disabled by bios
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
kvm: disabled by bios
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
kvm: disabled by bios
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
kvm: disabled by bios
kvm: disabled by bios
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
rfkill: input handler disabled
systemd-journald[501]: File /var/log/journal/f712ca1087234ad79235416936857038/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
rfkill: input handler enabled
EXT4-fs (sda1): warning: mounting fs with errors, running e2fsck is recommended
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
rfkill: input handler disabled
nvidia-uvm: Loaded the UVM driver, major device number 234.
EXT4-fs (sda1): error count since last fsck: 2
EXT4-fs (sda1): initial error at time 1594227988: ext4_journal_check_start:83
EXT4-fs (sda1): last error at time 1594227988: ext4_journal_check_start:83